Eonvic 3.5mm 1/8" TRS to 3 pin Mini-XLR Audio Cable For AKG K7XX headphones
About this deal
To wire these we use a 4 core and screen cable, and wire the unused pin inside the XLR to the ground inside the jack.
This ensures that despite the increased thickness of our wire, there is no skin effect until the frequency gets over 700khz and even the highest res audio will not get rolled off at the top. We have excluded balanced connection options from this listing as the headphone end only uses 3-pins, but if you would like an alternate connector type or 4-pin mini-XLR cable, see our other listings.We modify a lot of headphones here at custom cans so thought it may be useful or fun for some people if we showed some of what we do. It can be made to one of various lengths between 1-3m, with lengths above 1m costing more, where the length is the total approximate length from source connector to headphone connector to within a few cm, and includes the length of the connector body. Turning off the personalised advertising setting won’t stop you from seeing Etsy ads, but it may make the ads you see less relevant or more repetitive. At KONDOR BLUE, we always stand behind our extensive line of premium quality cables with a lifetime warranty.
At the same time, the xlr audio cable is designed with a thick and durable mini xlr head, the copper wire is gold plated to make the cable feel good.
Please be advised that this is not a balanced lead, this is a stereo lead, and will not function with microphones that require Phantom Power to operate. We believe you should not use a cable as “tone control”, and the sound is as good as it is going to get as it leaves the amp – the cable’s job is to get the signal to the headphones without adding or removing anything from the sound. This mini xlr to audio cable is designed as a stereo audio cable with its reciprocating frequency, high density and durability. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.
Convert your favourite 3 pin mini XLR microphone to work on different brand of body pack transmitter with different connection. These are great to use when you need a replacement for your old or damaged occ cable and audio cables, if you want a quality set of earphones that is not the same as ada original equipments. Silver is the better conductor however gold is highly resistant to corrosion so is favoured for its durability. With a standard stranded copper wire, as charge can move from one strand to another, they act as one thick solid conductor.
We are keen for our cables to stay in use for as long as possible to help prevent waste and save the environment. This cable is made with one 3-pin mini-XLR by Rean at the headphone end, wired in the standard configuration. At the same time, this mini xlr to xlr audio cable has a high degree of flexibility and durability, with a solid copper shell, aluminum foil and braided shielding.